For a broader overview of winter watering, see our winter watering guide. This article focuses on estimating an amount for an individual tree. Colorado State University Extension gives a general survival guideline of about 10 gallons of water per inch of trunk diameter for a tree during fall and winter watering.
That figure is a starting point, not a one-size-fits-all prescription. Tree species, soil, recent precipitation, drainage, and establishment all affect how much water a tree needs.
Measure the tree
Measure trunk diameter about 6 inches above the ground. Extension’s general guideline is about 10 gallons per inch of diameter. For example, a 2-inch tree would start at about 20 gallons. Adjust for rain, snowmelt, soil moisture, and site drainage; do not apply the full amount if the soil is already wet or frozen.
Focus on recently planted trees
Newly planted trees are more susceptible to winter drought injury. Extension’s establishment rule of thumb is about one year per inch of trunk caliper, though poor soil, limited irrigation, or planting problems can extend establishment. Water slowly at multiple points under the dripline and beyond it where practical, allowing moisture to soak into the soil rather than run off.
Choose a safe watering day
Water during an extended dry period when there is no snow cover, air temperatures are above 40°F, and the soil is not frozen. Midday gives water time to soak in before evening temperatures fall. Check soil moisture before watering and disconnect hoses afterward so they do not freeze.
Not sure whether a tree needs attention? An assessment can help distinguish drought stress from other problems. Request an estimate or call (303) 456-6898.
For more detail, see Colorado State University Extension’s fall and winter watering recommendations.
American Tree Colorado has kept Front Range trees healthy since 1993. Ask our ISA Certified Arborist-led team which of your trees need winter care. Request your free estimate.
